Prosys II data download

Anything about geophysics and geoscience: jobs, events, technical or general discussions ...
Post Reply
Sperga87
Member
Member
Posts: 2
Joined: Thu Mar 05, 2020 9:53 am

Prosys II data download

Post by Sperga87 »

Hello.


I have problems with data transfer from SYSCAL-R2 IRIS resistivity meter instrument to a PROSYS II software. When i click "download" and then "ok" it says "synchronizing" and after about 3 - 5 minutes it says "Time out Version ???"

As far as I know the USB check is ok, i have an original USB cable. I Use windows 10 on a 64x bit.


Any ideas? Is maybe the software not compatible with the instrument?

Thanks

Sperga87
Member
Member
Posts: 2
Joined: Thu Mar 05, 2020 9:53 am

Re: Prosys II data download

Post by Sperga87 »

Also,

When i hit "serial link" key on the SYSCAL-R2 instrument, there should be menu available to choose from, like "baud rate" and "transfer to PC" but all I get is "Connect serial link and hit enter". Well, I connected the serial link with the original USB cable to computer and press ok and then it says "wait" and when i try and press again the serail link key the same messagge apears (there is no menu available, just the "Connect serial link and hit enter").

Post Reply
  • Similar Topics
    Replies
    Views
    Last post