Page 3 of 3

Re: Sub bottom profiler

Posted: Fri Oct 15, 2010 8:10 pm
by gmowoe
They are "loose".The mechanical energy turns into heat through internal friction.

Re: Sub bottom profiler

Posted: Tue Oct 19, 2010 5:37 pm
by geophix
You probably already know it's easier to walk on pavements instead of beaches with sands. When you step on the sands, they don't respond to the pressure with rigid counter force. Instead, they slowly absorb the energy, making seismic wave traveling difficult. The main reason is that they were not compacted very well and each individual sand can slide relatively free among others.

Re: Sub bottom profiler

Posted: Fri Apr 01, 2011 3:05 am
by amit86920
I am not sure about Syqwest but I know people suffring with the hardware quality of Syqwest Try gathering information on GeoAcoustics SBP it is really work horse of the industry.

Re: Sub bottom profiler

Posted: Mon May 16, 2011 7:24 am
by Gery

Code: Select all

I am not sure about Syqwest but I know people suffring with the hardware quality of Syqwest Try gathering information on GeoAcoustics SBP it is really work horse of the industry.
and could you post some images acquired with that device?

Re: Sub bottom profiler

Posted: Mon May 16, 2011 3:26 pm
by gmowoe
Yeah, images please.

Re: Sub bottom profiler

Posted: Tue Nov 01, 2011 7:33 am
by unclebens
As with all SeaKing sensors, it is possible to integrate the Parametric Sub Bottom Profiler into the Tritech ArcNet network, which enables the data to be displayed and logged along with other SeaKing sensors on the Seanet Surface Control Unit.

Re: Sub bottom profiler

Posted: Wed Nov 02, 2011 11:21 am
by Gery
unclebens wrote:As with all SeaKing sensors, it is possible to integrate the Parametric Sub Bottom Profiler into the Tritech ArcNet network, which enables the data to be displayed and logged along with other SeaKing sensors on the Seanet Surface Control Unit.
really?.... and... as posted before, could you share some images? the ones above didn't share any images.

Re: Sub bottom profiler

Posted: Thu Jul 19, 2012 4:35 am
by paraban
here there are some nice examples: http://www.g3eo.info/seismicreflection_examples.html

Re: Sub bottom profiler

Posted: Sat Jan 12, 2013 10:35 am
by nedjai
Dear all

I have a Stratabox (SyQwest) 10 MHz and I use it to investigate lakes' sediment. I don't know if anyone can help me to choose a software for acquisition and post processing. The sediments of my lakes are principally clay and the max depth of water don't exceed 50 meters.
Thank you

Re: Sub bottom profiler

Posted: Sat Jan 12, 2013 4:35 pm
by gmowoe
StrataBox has its own data acquistion software. You can use Chesapeake Sonarwiz to process the data.

Re: Sub bottom profiler

Posted: Fri Jan 18, 2013 7:23 pm
by DELPH
Hi,

I can propose that you look at our DELPH Seismic software (delph.ixblue.com) : It can take Stratabox or any SBP / 2D Seismic data in XTF or SEGY format. It is intuitive and very fast at processing, interpreting and 2D/3D mapping data. Note that its also handles side-scan & magnetometer data, import bathymetry and other map overlays. Would you give it a try, please let me know !

Philippe

Re: Sub bottom profiler

Posted: Sun Dec 01, 2013 5:53 pm
by MichelMM
Try the subbottom system of Meridata (www.meridata.fi). They integrate different sound sources in a single system and the results are very good. I have one since 2000 and just upgraded it.
You can choose up to 4 different sound sources (chirp, side scan, boomer, sparker), in a single system and operate them simultaneously

Re: Sub bottom profiler

Posted: Sun Dec 08, 2013 4:28 pm
by merkez
MichelMM wrote:Try the subbottom system of Meridata (http://www.meridata.fi). They integrate different sound sources in a single system and the results are very good. I have one since 2000 and just upgraded it.
You can choose up to 4 different sound sources (chirp, side scan, boomer, sparker), in a single system and operate them simultaneously
That's interesting and looks promising. Shame that I've never heard their names before. :o

Re: Sub bottom profiler

Posted: Sun Jan 10, 2021 9:23 pm
by Gery
paraban wrote:
Thu Jul 19, 2012 4:35 am
here there are some nice examples: http://www.g3eo.info/seismicreflection_examples.html
Here nice examples, take a look: https://g3eo.com/examples.html