Void detection on a pier

Geophysical applications on environmental investigation, mineral prospecting, engineering, archaeology, forensics, hydrology...
Post Reply
tomwilliam
Member
Member
Posts: 2
Joined: Sun Apr 22, 2018 5:20 pm

Void detection on a pier

Post by tomwilliam »

Good afternoon guys!
Hope you can help me out with the following data.
The survey was conducted on a pier with the RIS MF HI MOD (200 & 600Mhz antenna) with the objective to locate voids under the concrete.
I know void signatures may appear in different ways and not always show a ringing effect - and we are also looking for a negative response (black-white-black). The data collected with the 600Mhz antenna has only a 1.5m depth range while with the 200Mhz we get to 2.5m.

Could there be a void between:
X11.8 - X12.3 and Y 0.38 - Y1.3;
X32 - X55 and Y0.65 - Y1.2?

GPR.JPG
Best regards,

User avatar
geophix
VIP Member
VIP Member
Posts: 935
Joined: Fri Jul 24, 2009 9:26 am

Re: Void detection on a pier

Post by geophix »

Can not see the image.

gmradar
Platinum Member
Platinum Member
Posts: 159
Joined: Thu Mar 29, 2012 5:27 pm

Re: Void detection on a pier

Post by gmradar »

Can you post the picture please?
Symetrics Geophysics and NDT
Your reliable Geo Supplier
Shop :arrow: https://www.gmradar.com/shop.html#/
Website: www.symetrics-ndt.com

Post Reply
  • Similar Topics
    Replies
    Views
    Last post