Page 1 of 1

How to import GPR data to voxler

Posted: Wed Dec 23, 2020 7:47 pm
by j0rd4nian
Hello everyone,

I hope all of you well, I just want help to know how to import GPR data to voxler?

Please if there is anyways just tell me.

Thanks

Re: How to import GPR data to voxler

Posted: Mon Dec 28, 2020 5:49 am
by benast
Hi,
You can export your gpr datas as slices/Bmp or ascii (depends of your postprocessing software) then import in voxler
regards
ben

Re: How to import GPR data to voxler

Posted: Thu Jan 07, 2021 3:05 pm
by Helmihenna
Hi j0rd4nian,

If you have 2D cross sections, rather than x,y,z grids, really you have x, y, or some x/y distance, ,z, and c grids. You will need x, y, z, c in order to grid the data in Voxler and create a volume. To do this, you will need to assign real-world x and y coordinates to your profile lines, so you will likely want to convert your GRDs to DATs. Once you've done the coordinate assignment, you can combine the files into a single DAT for import into Voxler. If you don't know how to do this coordinate assignment, you can modify the instructions here: https://support.goldensoftware.com/hc/e ... -profiles-. If you have x or y rather than distance as the first variable, the steps will be much simpler, since all you will have to do is calculate the equation of the line between the two x,y endpoints of the profile, and then calculate the y's for each x from your grid (or alternatively, calculate the x's for each y).