How to import GPR data to voxler

Geophysical applications on environmental investigation, mineral prospecting, engineering, archaeology, forensics, hydrology...
Post Reply
j0rd4nian
Member
Member
Posts: 1
Joined: Wed Dec 23, 2020 7:44 pm

How to import GPR data to voxler

Post by j0rd4nian »

Hello everyone,

I hope all of you well, I just want help to know how to import GPR data to voxler?

Please if there is anyways just tell me.

Thanks

benast
Member
Member
Posts: 6
Joined: Sun Sep 02, 2018 3:29 am

Re: How to import GPR data to voxler

Post by benast »

Hi,
You can export your gpr datas as slices/Bmp or ascii (depends of your postprocessing software) then import in voxler
regards
ben

Helmihenna
Member
Member
Posts: 2
Joined: Thu Jan 07, 2021 10:41 am

Re: How to import GPR data to voxler

Post by Helmihenna »

Hi j0rd4nian,

If you have 2D cross sections, rather than x,y,z grids, really you have x, y, or some x/y distance, ,z, and c grids. You will need x, y, z, c in order to grid the data in Voxler and create a volume. To do this, you will need to assign real-world x and y coordinates to your profile lines, so you will likely want to convert your GRDs to DATs. Once you've done the coordinate assignment, you can combine the files into a single DAT for import into Voxler. If you don't know how to do this coordinate assignment, you can modify the instructions here: https://support.goldensoftware.com/hc/e ... -profiles-. If you have x or y rather than distance as the first variable, the steps will be much simpler, since all you will have to do is calculate the equation of the line between the two x,y endpoints of the profile, and then calculate the y's for each x from your grid (or alternatively, calculate the x's for each y).

Post Reply
  • Similar Topics
    Replies
    Views
    Last post